Orange Pi Zero Plus

by Shenzhen Xunlong Software CO.,Limited

Image of Board

What’s Orange Pi Zero Plus?

It’s an open-source single-board computer. It can run Android 5.1, Ubuntu, Debian image. It uses the AllWinner H5 SoC, and has 512MB DDR3 SDRAM.

What can I do with Orange Pi Zero Plus?

Build… A computer A wireless server Games Music and sounds HD video A speaker Android Scratch Pretty much anything else, because Orange Pi Zero Plus is open source

Who’s it for?

Orange Pi Zero Plus is for anyone who wants to start creating with technology – not just consuming it. It’s a simple, fun, useful tool that you can use to start taking control of the world around you.

  • H5 Quad-core Cortex-A53
  • H5 Mali450 GPU
  • 512MB DDR3 (shared with GPU)
  • TF card (Max. 32GB) / Spi flash(2MB)
  • Realtek RTL8189FTV, IEEE 802.11 b/g/n
  • 1000M/100M/10M Ethernet RJ45
  • Supports external board via 13pins
  • USB OTG can supply power
  • UART, ground
  • One USB 2.0 HOST, One USB 2.0 OTG
  • Power Button(SW602)
  • 26 Pins Header, compatible with Raspberry Pi B+
  • 13 Pins Header, with 2x USB, IR pin, AUDIO(MIC, AV)
  • Power led & Status led
  • Android5.1, Lubuntu, Debian, Armbian Image



Have some info to add for this board? Edit the source for this page here.

Adafruit Blinka Installation

We use a special library called adafruit_blinka (named after Blinka, the CircuitPython mascot) to provide the layer that translates the CircuitPython hardware API to whatever library the Linux board provides.

For example, on Raspberry Pi we use the python RPi.GPIO library. For any I2C interfacing we'll use ioctl messages to the /dev/i2c device. For SPI we'll use the spidev python library, etc. These details don't matter so much because they all happen underneath the adafruit_blinka layer.