cezerio dev ESP32C6
by cezerio
cezerio dev ESP32C6 based on ESP32-C6FH4 SoC from Espressif, RISC-V single-core processor, 4 MB flash memory, and a diverse selection of wireless connectivity options: 2.4 GHz WiFi 6, Bluetooth® 5.3, Zigbee 3.0 and Thread 1.3 (802.15.4). Moreover, Wi-Fi 6’s Target Wake Time (TWT) technology effectively reduces device power consumption, extending battery life and ensuring long-lasting device performance.
The footprint is Feather-compatible. I2C connector seamlessly integrates the vast ecosystem of sensors, actuators, and more.
This development board also includes a LiPo battery charger, 6-axis IMU (3-axis Accelerometer & 3-axis Gyroscope), 5x5 RGB LED matrix, an addressable RGB LED and more.
For primary power and programming, the board is also equipped with a USB-C connector and a 2-pin JST connector for a LiPo battery.
The ESP32-C6 includes 20 GPIO pins with a wide range of peripheral options including SPI, UART, I2C, I2S, LED PWM, USB Serial/JTAG controller, ADC and more.
Features & Specifications -32-bit High Performance RISC-V processor up to 160MHz -32-bit Low Power RISC-V processor at 20Mhz -2.4GHz WiFi 6 - 802.11ax -Bluetooth 5.3 (LE) + Mesh -Zigbee and Thread (802.15.4) -4MB QSPI Flash -6-axis IMU (3-axis Accelerometer & 3-axis Gyroscope) LSM6DS3TR-C -Temperature Sensor -USB-C Connector -Reverse USB back-feed protection -1A step-down buck DC-DC converter -Ultra low deep sleep current -BQ21040DBVR 800mAh 1-cell Li-ion and Li-polymer Battery Charging -Power and Charge LEDs -20 x Multifunctional GPIO (Digital, 12-bit SAR ADC, SPI, I2C, UART, I2S, LED PWM, PCNT, TWAI, USB Serial/JTAG, SDIO, Motor Control PWM, RMT, PARLIO, DMA, ETM) -3D High Gain Antenna -Board Dimensions: 50,8mm x 22.86mm -Max Thickness: 6.6mm at JST PH battery connector -4 Mounting Holes -4-pin Qwiic Connector -2-pin JST PH Connector for LiPo Battery -2835 Addressable RGB LED -Two Buttons (Boot & Reset) -25 x WS2812B 1010 RGB LED
Purchase
You can purchase your very own cezerio dev ESP32C6 from:
Contribute
Have some info to add for this board? Edit the source for this page here.
Absolute Newest
Every time we commit new code to CircuitPython we automatically build binaries for each board and language. The binaries are stored on Amazon S3, organized by board, and then by language. These releases are even newer than the development release listed above. Try them if you want the absolute latest and are feeling daring or want to see if a problem has been fixed.
Previous Versions of CircuitPython
All previous releases of CircuitPython are available for download from Amazon S3 through the button below. For very old releases, look in the OLD/ folder for each board. Release notes for each release are available at GitHub button below.
Older releases are useful for testing if you something appears to be broken in a newer release but used to work, or if you have older code that depends on features only available in an older release. Otherwise we recommend using the latest stable release.