Maker Go ESP32C3 Supermini
by Maker Go
ESP32C3 SuperMini is an IoT mini development board based on the Espressif ESP32C3 WiFi/Bluetooth dual mode chip. ESP32-C3 is a 32-bit RISC-V CPU that includes an FPU (floating point unit) that can perform 32-bit single precision operations and has powerful computing power. It has excellent RF performance and supports IEEE 802.11 b/g/n WiFi and Bluetooth 5 (LE) protocols. This board comes with an external antenna to enhance the signal strength of wireless applications. It also has a compact and exquisite appearance combined with a single surface mount design. It is equipped with rich interfaces, with 11 digital I/Os that can be used as PWM pins and 4 analog I/Os that can be used as ADC pins. It supports four serial interfaces: UART, I2C, and SPI. There is also a small reset button and a boot loader mode button on the board. Based on the above characteristics, ESP32C3SuperMini is positioned as a high-performance, low-power, and cost-effective IoT mini development board, suitable for low-power IoT applications and wireless wearable applications.
Technical Details
- Powerful CPU: ESP32-C3, 32-bit RISC-V single core processor, running at frequencies up to 160 MHz
- WiFi: 802.11b/g/n protocol, 2.4GhHz, supports Station mode, SoftAP mode, SoftAP Station mode, hybrid mode
- Bluetooth 5.0
- Ultra low power consumption: Deep sleep power consumption is about 43 μ A
- Rich board resources: 400KB SRAM, 384KB ROM with built-in 4Mflash.
- Chip model: ESP32C3FN4
- Ultra small size: as small as the thumb (22.52x18mm) in a classic shape, suitable for wearable devices and small projects
- Reliable security features: Encryption hardware accelerator supporting AES-128/256, hashing, RSA, HMAC, digital signature, and secure boot
- Rich interfaces: 1xI2C, 1xSPI, 2xUART, 11xGPIO (PWM), 4xADC
- Single sided components, surface mount design
- Blue light led on board: gpio8 pin
Purchase
Add any links to purchase the board
Contribute
Have some info to add for this board? Edit the source for this page here.
CircuitPython 9.1.4
This is the latest stable release of CircuitPython that will work with the Maker Go ESP32C3 Supermini.
Use this release if you are new to CircuitPython.
Built-in modules available: _asyncio , _pixelmap , adafruit_bus_device , adafruit_pixelbuf , aesio , analogbufio , analogio , array , atexit , audiobusio , audiocore , audiomixer , audiomp3 , binascii , bitbangio , bitmaptools , board , builtins , builtins.pow3 , busdisplay , busio , busio.SPI , busio.UART , canio , codeop , collections , digitalio , displayio , dualbank , epaperdisplay , errno , espidf , espnow , fontio , fourwire , framebufferio , getpass , gifio , hashlib , i2cdisplaybus , io , ipaddress , jpegio , json , keypad , keypad.KeyMatrix , keypad.Keys , keypad.ShiftRegisterKeys , keypad_demux , keypad_demux.DemuxKeyMatrix , locale , math , max3421e , mdns , microcontroller , msgpack , neopixel_write , nvm , onewireio , os , os.getenv , ps2io , pulseio , pwmio , rainbowio , random , re , rgbmatrix , rtc , sdcardio , select , sharpdisplay , socketpool , ssl , storage , struct , supervisor , synthio , sys , terminalio , time , touchio , traceback , ulab , usb , vectorio , warnings , watchdog , wifi , zlib ,
CircuitPython 9.2.0-beta.1
This is the latest development release of CircuitPython that will work with the Maker Go ESP32C3 Supermini.
Alpha development releases are early releases. They are unfinished, are likely to have bugs, and the features they provide may change. Beta releases may have some bugs and unfinished features, but should be suitable for many uses. A Release Candidate (rc) release is considered done and will become the next stable release, assuming no further issues are found.
Please try alpha, beta, and rc releases if you are able. Your testing is invaluable: it helps us uncover and find issues quickly.
Release Notes for 9.2.0-beta.1
Built-in modules available: _asyncio , _pixelmap , adafruit_bus_device , adafruit_pixelbuf , analogbufio , analogio , array , atexit , audiobusio , audiocore , audiomixer , audiomp3 , binascii , bitbangio , bitmaptools , board , builtins , builtins.pow3 , busdisplay , busio , busio.SPI , busio.UART , canio , codeop , collections , digitalio , displayio , dualbank , epaperdisplay , errno , espidf , espnow , fontio , fourwire , framebufferio , getpass , gifio , hashlib , i2cdisplaybus , io , ipaddress , jpegio , json , keypad , keypad.KeyMatrix , keypad.Keys , keypad.ShiftRegisterKeys , locale , math , max3421e , mdns , microcontroller , msgpack , neopixel_write , nvm , onewireio , os , os.getenv , ps2io , pulseio , pwmio , rainbowio , random , re , rgbmatrix , rtc , sdcardio , select , sharpdisplay , socketpool , socketpool.socketpool.AF_INET6 , ssl , storage , struct , supervisor , synthio , sys , terminalio , time , touchio , traceback , ulab , usb , vectorio , warnings , watchdog , wifi , zlib ,
Absolute Newest
Every time we commit new code to CircuitPython we automatically build binaries for each board and language. The binaries are stored on Amazon S3, organized by board, and then by language. These releases are even newer than the development release listed above. Try them if you want the absolute latest and are feeling daring or want to see if a problem has been fixed.
Previous Versions of CircuitPython
All previous releases of CircuitPython are available for download from Amazon S3 through the button below. For very old releases, look in the OLD/ folder for each board. Release notes for each release are available at GitHub button below.
Older releases are useful for testing if you something appears to be broken in a newer release but used to work, or if you have older code that depends on features only available in an older release. Otherwise we recommend using the latest stable release.