microS2

by microDev

Image of Board

Introducing the microS2 - An ESP32-S2 based development board in the size of an esp32 module!

With Wi-Fi, native USB and a load of Flash & PSRAM the microS2 is perfect for use with CircuitPython while keeping the form-factor small.

Features & Specifications

  • ESP32-S2 32-bit 240MHz Tensilica processor - the next generation of ESP32
  • 16MB Flash & 8MB PSRAM - you can have huge data buffers
  • 2.4 GHz Wi-Fi 802.11b/g/n - get communicating with the world
  • All pins exposed & breadboard compatible - too good to be true
  • Neopixel (IO33) Blue led (IO21) - who doesn’t love some lights
  • Reset & Boot buttons - can also be used as user button
  • USB micro-B & QWIIC/STEMMA connector - easily connect with peripherals
  • 31 x 18 mm - all of the above in a small form factor

Learn More

Contribute

Have some info to add for this board? Edit the source for this page here.

CircuitPython 7.0.0

This is the latest stable release of CircuitPython that will work with the microS2.

Start here if you are new to CircuitPython.

Release Notes for 7.0.0

Built-in modules available: _bleio, adafruit_bus_device, adafruit_pixelbuf, aesio, alarm, analogio, atexit, audiobusio, audiocore, audiomixer, binascii, bitbangio, bitmaptools, board, busio, canio, countio, digitalio, displayio, dualbank, errno, fontio, framebufferio, frequencyio, getpass, imagecapture, ipaddress, json, keypad, math, microcontroller, msgpack, neopixel_write, nvm, onewireio, os, paralleldisplay, ps2io, pulseio, pwmio, qrio, rainbowio, random, re, rgbmatrix, rotaryio, rtc, sdcardio, sharpdisplay, socketpool, ssl, storage, struct, supervisor, synthio, terminalio, time, touchio, traceback, ulab, usb_cdc, usb_hid, usb_midi, vectorio, watchdog, wifi

Absolute Newest

Every time we commit new code to CircuitPython we automatically build binaries for each board and language. The binaries are stored on Amazon S3, organized by board, and then by language. Try them if you want the absolute latest and are feeling daring or want to see if a problem has been fixed.

Past Releases

All previous releases are listed on GitHub, with release notes, and are available for download from Amazon S3. They are handy for testing, but otherwise we recommend using the latest stable release. Some older GitHub release pages include the same binaries for downloading. But we have discontinued including binaries as assets on newer release pages because of the large number of files for each release.

BROWSE GITHUB

Install, Repair, or Update UF2 Bootloader

Latest version: 0.5.2

The UF2 bootloader allows you to load CircuitPython, MakeCode, and Arduino programs. The bootloader is not CircuitPython. If a UF2 bootloader is installed, you can check its version by looking in the INFO_UF2.TXT file when the BOOT drive is visible (FTHRS2BOOT, MAGTAGBOOT, HOUSEBOOT, etc.)

It is not necessary to reinstall a UF2 bootloader you unless a BOOT drive is not visible when in UF2 bootloader mode, or you know of a problem with your current UF2 bootloader.

If a UF2 bootloader has never been installed on the board, or the UF2 bootloader was removed by erasing or overwriting the flash, the UF2 bootloader must be installed in order to flash .uf2 files onto the board. .bin files can be uploaded without a UF2 bootloader, using the Adafruit WebSerial ESPTool or esptool.py.

Note: update.uf2 files are not currently working on ESP32-S2 boards.

Important: this will erase previously flashed firmware and sketches from the board, but needs to be perfomed only once.

  • Unzip to find the file combined.bin.
  • Place board in bootloader mode:
    • Plug board into a USB port on your computer using a data/sync cable. Make sure it is the only board plugged in, and that a charge-only cable is not being used.
    • Press and hold down the BOOT or 0 button.
    • Press and release the RESET or RST button.
    • Release the BOOT button.
  • Upload combined.bin (Google Chrome 89 or newer):
    • Open Adafruit WebSerial ESPTool in a new window/tab.
    • Select 460800 Baud from the pull-down menu (top-right).
    • Click Connect (top-right).
    • Select the COM or Serial port from the pop-up window.
    • After successful connection, click Erase.
    • After successful erase, click any Choose a file..., then locate and select the combined.bin file unzipped earlier.
    • After successfully choosing combined.bin, click Program.
    • After the TinyUF2 firmware update is complete, press the RESET button on the board. A new drive BOOT should be visible in your file browser.

After you update, check INFO_UF2.TXT to verify that the bootloader version has been updated. Then you will need to load or reload CircuitPython using the .uf2 file.