Music Thing Modular Workshop System
by Music Thing Modular
The Workshop System is an analogue modular synth and a powerful audio computer – designed to be useful and open:
- A genre-neutral toolkit, a little box of ways to make and manipulate music and sound.
- A patchable, hackable, code-able modular synth that can be used in many different ways.
- A system that works with things you already have. Plug in your phone, a drum machine, a laptop, guitar pedals or a microphone.
- A computer that uses tiny program cards that are completely hackable. Anyone who writes code can make, share, sell their creations — sequencers, effects, interfaces.
The Workshop System arrives as a DIY kit which will take a few hours to put together. All the tiny SMD components have already been soldered for you, so the build process consists mainly of soldering jack sockets, potentiometers and switches while following the build guide: musicthing.co.uk/Workshop_System_Build_Guide
The Workshop System kit includes:
- All hardware required to build the Workshop System (PCBs, Front & Back Panel, components, knobs, buttons etc.)
- A rugged hard plastic carry case for easy portability with internal foam cutout to keep the system protected
- 2 x audio adaptor cables to plug a guitar pedal into the Stompbox section of the Workshop System – the cables are 3.5mm (1/8″) Minijack to 6.35mm (1/4″) Jack
- A 20cm DC barrel cable for directly powering a guitar pedal from the front of the Workshop – 9V (centre-negative)
- A keyring and set of 4 x Program Cards to get started using the computer section. The included cards are: a Turing Machine (random looping sequencer), a lush digital Reverb, a MIDI to CV converter and a Blank card to fill with another function of your choice – or to explore creating programmes of your own. More blank cards can be found HERE
The kit does not include:
- Eurorack patch cables – we figure that many users of modular synths already have patch cables lying around – but if you’re just starting out and would like a set of short patch cables then we have a cable set available HERE
- A power cable – The Workshop System has two power options: The easiest way is via USB-C PD power, but you can also use a regular 15-25v DC barrel connection. The system will happily run from battery powerbanks and laptop adaptors. We feel that there are already enough USB-C cables in the world. If you do want to source a USB-C wallwart then we recommend using one that’s rated at 30W or above.
The Workshop System has 14 modules:
- 2 x SineSquare Oscillators Simple vintage-style oscillators made of 1970s tech.
- 2 x Humpback Filters Similarly vintage-style filters, designed by Philip Goulding of God’s Box.
- 2 x Slopes These work as attack/decay envelopes, LFOs and portamento generators.
- Computer Is a multi-function module with knobs, a switch and audio, CV and pulse ins and outs. Initially, the system comes with a USB MIDI card, a Turing Machine sequencer and a Reverb card. A community of programmers are creating more cards.
- Stereo In takes a 3.5mm stereo input and boosts it to modular level.
- Ring Mod is a great-sounding ring modulator, connected to the two sines. It also works as a simple VCA.
- Stompbox is an interface for guitar pedals, with blend and feedback controls to make boring pedals more interesting. There’s a 9v power outlet for pedals below this module.
- Amplifier contains two simple circuits. One is connected to a piezo contact mic behind the panel, the other is the transistor-based input circuit from a MiniMoog. In other words, a Mikrophonie and a Mini Drive.
- 4 Voltages is a minimum viable keyboard: four voltage outputs, one knob, four pushbuttons. More fun to play with than to explain.
- Mix a simple output mixer, with two stereo channels, two mono channels and a powerful headphone amp / line out.
- PSU behind the panel is a power supply that runs on USB-C PD power or professional 15-25v barrel connectors. It works from battery powerbanks and laptop adaptors, most likely something you’ve already got at home.
Purchase
Contribute
Have some info to add for this board? Edit the source for this page here.
Absolute Newest
Every time we commit new code to CircuitPython we automatically build binaries for each board and language. The binaries are stored on Amazon S3, organized by board, and then by language. These releases are even newer than the development release listed above. Try them if you want the absolute latest and are feeling daring or want to see if a problem has been fixed.
Previous Versions of CircuitPython
All previous releases of CircuitPython are available for download from Amazon S3 through the button below. For very old releases, look in the OLD/ folder for each board. Release notes for each release are available at GitHub button below.
Older releases are useful for testing if you something appears to be broken in a newer release but used to work, or if you have older code that depends on features only available in an older release. Otherwise we recommend using the latest stable release.