ProductivityOpen P1AM-200
by AutomationDirect
The ProductivityOpen P1AM-200 is an automation platform compatible with Productivity1000 Series I/O modules, P1AM Series shields, and Arduino MKR format shields. It can be programmed using the Arduino IDE or with the CircuitPython language. The board uses the SAMD51P20 Microcontroller.
- Cortex M4 core running at 120 MHz
- Floating point support with Cortex M4 DSP instructions
- 1MB flash, 256 KB RAM
- 16MB external QSPI flash for CircuitPython code, libraries, and files
- Easy to use interface to Productivity1000 Industrial I/O modules
- UL/CE Agency approvals
- Supercap backed real time clock
- ATECC608 CryptoAuthentication chip
- AT24MAC402 EEPROM with built-in MAC address
Documentation
Purchase
Contribute
Have some info to add for this board? Edit the source for this page here.
CircuitPython 9.2.0
This is the latest stable release of CircuitPython that will work with the ProductivityOpen P1AM-200.
Use this release if you are new to CircuitPython.
Built-in modules available: _asyncio , _bleio , _pixelmap , adafruit_bus_device , adafruit_pixelbuf , aesio , alarm , analogio , array , atexit , audiobusio , audiocore , audioio , audiomixer , audiomp3 , binascii , bitbangio , bitmaptools , board , builtins , builtins.pow3 , busdisplay , busio , busio.SPI , busio.UART , codeop , collections , countio , digitalio , displayio , epaperdisplay , errno , floppyio , fontio , fourwire , framebufferio , frequencyio , getpass , gifio , i2cdisplaybus , i2ctarget , io , jpegio , json , keypad , keypad.KeyMatrix , keypad.Keys , keypad.ShiftRegisterKeys , locale , math , max3421e , microcontroller , msgpack , neopixel_write , nvm , onewireio , os , os.getenv , paralleldisplaybus , ps2io , pulseio , pwmio , rainbowio , random , re , rgbmatrix , rotaryio , rtc , samd , sdcardio , select , sharpdisplay , storage , struct , supervisor , synthio , sys , terminalio , time , touchio , traceback , ulab , usb , usb_cdc , usb_hid , usb_midi , vectorio , warnings , watchdog , zlib ,
Features: Arduino Shield Compatible
Absolute Newest
Every time we commit new code to CircuitPython we automatically build binaries for each board and language. The binaries are stored on Amazon S3, organized by board, and then by language. These releases are even newer than the development release listed above. Try them if you want the absolute latest and are feeling daring or want to see if a problem has been fixed.
Previous Versions of CircuitPython
All previous releases of CircuitPython are available for download from Amazon S3 through the button below. For very old releases, look in the OLD/ folder for each board. Release notes for each release are available at GitHub button below.
Older releases are useful for testing if you something appears to be broken in a newer release but used to work, or if you have older code that depends on features only available in an older release. Otherwise we recommend using the latest stable release.
Update UF2 Bootloader
Latest version: v3.15.0
The bootloader allows you to load CircuitPython, MakeCode, and Arduino programs. The bootloader is not CircuitPython. You can check the current version of your bootloader by looking in the INFO_UF2.TXT file when the BOOT drive is visible (FEATHERBOOT, CPLAYBOOT, etc.).
It is not necessary to update your bootloader if it is working fine. Read the release notes on GitHub to see what has been changed. In general, we recommend you not update the bootloader unless you know there is a problem with it or a support person has asked you to try updating it.
To update, first save the contents of CIRCUITPY, just in case. Then double-click the reset button to show the BOOT drive. Drag the update-bootloader .uf2 file to the BOOT drive. Wait a few tens of seconds for the bootloader to update; the BOOT drive will reappear. After you update, check INFO_UF2.TXT to verify that the bootloader version has been updated. Then you will need to reload CircuitPython.