Seeed Studio XIAO ESP32C6
by Seeed Studio
XIAO ESP32C6 is a cost-effective MCU based on Espressif’s ESP32-C6. This compact MCU excels in Matter-compliant smart home applications with its support for various wireless connectivity (2.4GHz Wi-Fi 6, BLE 5.0, Zigbee, and Thread). Designed with the thumb-size footprint and a single-sided mount of the XIAO Series, it’s perfect for space-limited projects. Encrypted on the chip, the XIAO ESP32C6 ensures a desired level of security streamlined development experience, and swift market entry by integrating easily with major IoT Cloud platforms.
Features
- Enhanced Connectivity: Combines 2.4GHz Wi-Fi 6 (802.11ax), Bluetooth 5(LE), and IEEE 802.15.4 radio connectivity, allowing you to apply the Thread and Zigbee protocols.
- Matter Native: Supports building Matter-compliant smart home projects thanks to its enhanced connectivity, achieving interoperability
- Security Encrypted on Chip: Powered by ESP32-C6, it brings enhanced encrypted-on-chip security to your smart home projects via secure boot, encryption, and Trusted Execution Environment (TEE)
- Outstanding RF performance: Has an on-board antenna with up to 80m BLE/Wi-Fi range, while reserving an interface for external UFL antenna
- Leveraging Power Consumption: Comes with 4 working modes, with the lowest being 15 μA in deep sleep mode, while also supporting lithium battery charge management.
- Dual RISC-V Processors: Incorporates two 32-bit RISC-V processors, with the high-performance processor running up to 160 MHz, and the low-power processor clocking up to 20
- Classic XIAODesigns: Remains the classic XIAO designs of the thumb-size form factor of 21 x 17.5mm, and single-sided mount, making it perfect for space-limited projects such as wearables
Description
Seeed Studio XIAO ESP32C6 is powered by the highly-integrated ESP32-C6 SoC, built on two 32-bit RISC-V processors, with a high-performance (HP) processor with running up to 160 MHz, and a low-power (LP) 32-bit RISC-V processor, which can be clocked up to 20 MHz. There are 512KB SRAM and 4 MB Flash on the chip, allowing for more programming space, and bringing more possibilities to the IoT control scenarios.
XIAO ESP32C6 is Matter native thanks to its enhanced wireless connectivity. The wireless stack supports 2.4 GHz WiFi 6, Bluetooth® 5.3, Zigbee, and Thread (802.15.4). As the first XIAO member compatible with Thread, it’s a perfect fit for building Matter-compliant projects, thus achieving interoperability in smart-home.
To better support your IoT projects, XIAO ESP32C6 not only provides seamless integration with mainstream cloud platforms like ESP Rain Maker, AWS IoT, Microsoft Azure, and Google Cloud, but also leverages security for your IoT applications. With its on-chip secure boot, flash encryption, identity protection, and Trusted Execution Environment (TEE), this tiny board ensures the desired level of security for developers looking to build smart, secure, and connected solutions.
This new XIAO is equipped with a high-performance onboard ceramic antenna with up to 80m BLE/Wi-Fi range, while it also reserves an interface for an external UFL antenna. At the same time, it also comes with an optimized power consumption management. Featuring four power modes and an onboard lithium battery charging management circuit, it works in the Deep Sleep mode with a current as low as 15 µA, making it an excellent fit for remote, battery-powered applications.
Being the 8th member of the Seeed Studio XIAO family, XIAO ESP32C6 remains the classic XIAO design. It is designed to fit the 21 x 17.5mm, XIAO Standard Size, while remains its classic single-sided components mounting. Even being thumb-sized, it amazingly breaks out 15 total GPIO pins, including 11 digital I/Os for PWM pins and 4 analog I/Os for ADC pins. It supports UART, IIC, and SPI serial communication ports. All these features make it a perfect fit for either space-limited projects such as wearables, or a production-ready unit for your PCBA designs.
Purchase
Getting Started
Since the ESP32C6 chip does not have support for native USB, you won’t see a CIRCUITPY drive appear when you plug it into your computer. Here is a complete guide for getting Circuitpython installed onto an ESP32C6 device, and for enabling Web Workflow so you can load your Python code onto it.
Contribute
Have some info to add for this board? Edit the source for this page here.
CircuitPython 9.1.3
This is the latest stable release of CircuitPython that will work with the Seeed Studio XIAO ESP32C6.
Use this release if you are new to CircuitPython.
Built-in modules available: _asyncio , _bleio , _pixelmap , adafruit_bus_device , adafruit_pixelbuf , aesio , alarm , analogbufio , analogio , array , atexit , audiomp3 , binascii , bitbangio , bitmaptools , board , builtins , builtins.pow3 , busdisplay , busio , busio.SPI , busio.UART , canio , codeop , collections , countio , digitalio , displayio , epaperdisplay , errno , espidf , espnow , fontio , fourwire , framebufferio , frequencyio , getpass , gifio , hashlib , i2cdisplaybus , io , ipaddress , jpegio , json , keypad , keypad.KeyMatrix , keypad.Keys , keypad.ShiftRegisterKeys , keypad_demux , keypad_demux.DemuxKeyMatrix , locale , math , max3421e , mdns , microcontroller , msgpack , neopixel_write , nvm , onewireio , os , os.getenv , ps2io , pulseio , pwmio , rainbowio , random , re , rotaryio , rtc , sdcardio , select , sharpdisplay , socketpool , ssl , storage , struct , supervisor , sys , terminalio , time , touchio , traceback , ulab , usb , vectorio , warnings , watchdog , wifi , zlib ,
CircuitPython 9.2.0-alpha.2351
This is the latest development release of CircuitPython that will work with the Seeed Studio XIAO ESP32C6.
Alpha development releases are early releases. They are unfinished, are likely to have bugs, and the features they provide may change. Beta releases may have some bugs and unfinished features, but should be suitable for many uses. A Release Candidate (rc) release is considered done and will become the next stable release, assuming no further issues are found.
Please try alpha, beta, and rc releases if you are able. Your testing is invaluable: it helps us uncover and find issues quickly.
Release Notes for 9.2.0-alpha.2351
Built-in modules available: _asyncio , _bleio , _pixelmap , adafruit_bus_device , adafruit_pixelbuf , aesio , alarm , analogbufio , analogio , array , atexit , audiomp3 , binascii , bitbangio , bitmaptools , board , builtins , builtins.pow3 , busdisplay , busio , busio.SPI , busio.UART , canio , codeop , collections , countio , digitalio , displayio , epaperdisplay , errno , espidf , espnow , fontio , fourwire , framebufferio , frequencyio , getpass , gifio , hashlib , i2cdisplaybus , io , ipaddress , jpegio , json , keypad , keypad.KeyMatrix , keypad.Keys , keypad.ShiftRegisterKeys , keypad_demux , keypad_demux.DemuxKeyMatrix , locale , math , max3421e , mdns , microcontroller , msgpack , neopixel_write , nvm , onewireio , os , os.getenv , ps2io , pulseio , pwmio , rainbowio , random , re , rotaryio , rtc , sdcardio , select , sharpdisplay , socketpool , socketpool.socketpool.AF_INET6 , ssl , storage , struct , supervisor , sys , terminalio , time , touchio , traceback , ulab , usb , vectorio , warnings , watchdog , wifi , zlib ,
Absolute Newest
Every time we commit new code to CircuitPython we automatically build binaries for each board and language. The binaries are stored on Amazon S3, organized by board, and then by language. These releases are even newer than the development release listed above. Try them if you want the absolute latest and are feeling daring or want to see if a problem has been fixed.
Previous Versions of CircuitPython
All previous releases of CircuitPython are available for download from Amazon S3 through the button below. For very old releases, look in the OLD/ folder for each board. Release notes for each release are available at GitHub button below.
Older releases are useful for testing if you something appears to be broken in a newer release but used to work, or if you have older code that depends on features only available in an older release. Otherwise we recommend using the latest stable release.