EFR32xG24 Dev Kit
by Silicon Labs
The xG24 Dev Kit is a low-cost, small form factor development and evaluation platform for the EFR32MG24 Wireless Gecko System-on-Chip
The board is a small and cost-effective, feature-rich, prototype and development platform based on the EFR32™ Wireless Gecko System-on-Chip. The xG24 Dev Kit is an ideal platform for developing energy-friendly connected IoT devices.
A built-in SEGGER J-Link debugger ensures easy debugging through the USB Micro-B connector.
Features
- EFR32 Wireless Gecko System-on-Chip(EFR32MG24B310F1536IM48-B)
- High-performance 2.4 GHz radio
- 32-bit ARM® Cortex®-M33 with 78.0 MHz maximum operating frequency
- 1536 flash and 256 kB RAM
- 32 Mbit external flash
- 2.4 GHz ceramic chip antenna
- Relative humidity and temperature sensor
- Ambient light sensor
- Hall effect sensor
- 6-axis inertial sensor
- Pressure sensor
- RGB LED and two push buttons
- 20-pin 2.54 mm breakout pads
- Qwiic® connector
- SEGGER J-Link on-board debugger
- Virtual COM port
- Packet Trace Interface (PTI)
- USB or coin cell battery powered
- External battery connector
Learn More
Purchase
Contribute
Have some info to add for this board? Edit the source for this page here.
CircuitPython 9.2.0
This is the latest stable release of CircuitPython that will work with the EFR32xG24 Dev Kit.
Use this release if you are new to CircuitPython.
Built-in modules available: _asyncio , _bleio , _pixelmap , adafruit_bus_device , adafruit_pixelbuf , aesio , analogio , array , atexit , binascii , bitmapfilter , bitmaptools , board , builtins , builtins.pow3 , busdisplay , busio , busio.SPI , busio.UART , codeop , collections , digitalio , displayio , epaperdisplay , errno , fontio , fourwire , framebufferio , getpass , gifio , i2cdisplaybus , io , jpegio , json , locale , math , microcontroller , msgpack , nvm , onewireio , os , os.getenv , pwmio , rainbowio , random , re , rtc , sdcardio , select , sharpdisplay , storage , struct , supervisor , sys , terminalio , time , traceback , ulab , vectorio , warnings , watchdog , zlib ,
Included frozen(?) modules: adafruit_ble , adafruit_register ,
Features: Battery Charging Bluetooth/BTLE Breadboard-Friendly STEMMA QT/QWIIC
Absolute Newest
Every time we commit new code to CircuitPython we automatically build binaries for each board and language. The binaries are stored on Amazon S3, organized by board, and then by language. These releases are even newer than the development release listed above. Try them if you want the absolute latest and are feeling daring or want to see if a problem has been fixed.
Previous Versions of CircuitPython
All previous releases of CircuitPython are available for download from Amazon S3 through the button below. For very old releases, look in the OLD/ folder for each board. Release notes for each release are available at GitHub button below.
Older releases are useful for testing if you something appears to be broken in a newer release but used to work, or if you have older code that depends on features only available in an older release. Otherwise we recommend using the latest stable release.